: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling.
The (or Eames RAR ) is a design classic known as the Rocking Armchair Rod Base . Whether you have an original Vitra/Herman Miller or a high-quality replica, the assembly generally follows a simple four-part process. 1. Inventory Check Before starting, ensure you have the following components: 1x Seat Shell: Usually molded plastic or fiberglass. 1x Eiffel Base: The wire "rod" structure. Chair.rar
: The rocking motion can cause screws to loosen over time; check them every few months. : Insert the four main screws through the
Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly. Whether you have an original Vitra/Herman Miller or
: Place the seat shell upside down on a soft surface (like a rug or the shipping box) to prevent scratching. Locate the four circular shock mounts on the bottom.
: Flip the wire Eiffel base upside down. Align the pre-drilled holes in the wooden runners with the brackets at the bottom of the base. Secure them using the provided screws.