Delta 52 611 Sander Manual 📌 ⏰

: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly :

Maintain a minimum clearance of between the table and the sanding belt for safety. Delta 52 611 Sander Manual

Insert the support rod into the base and tighten the socket head screw. : Clean unpainted surfaces (like the table) with

Slide the table assembly onto the rod and secure it with the secondary socket head screw. if using a workbench

: Must be secured to a workbench or floor; if using a workbench, drill four 3/8-inch holes to permanently bolt the base. 2. Setup and Installation

: Tilts 45° out (away from belt) and 20° in (toward belt).

: Overall height of 60", weighing roughly 200 lbs.